Panasonic SC-HT822V - Manual (Page 10)

10
RQT7708
Simple setup
≥You can attach the speakers directly to their bases (if you want to put them on shelves, for example).
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
Be sure to connect only positive (copper) wires to positive ( i) terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
Caution
Hold the speakers by the sides. Applying pressure to the front net can damage the speaker.
STEP
1
Assembly and connection of front and surround speakers
2
3
4
3 1
2
5
8
7
_:
`: 4
1 5
_:
`:
6
Insert the
wire fully.
4 Speaker units 4 Stands 4 Bases Speaker cables
≥2k4-m (13-foot) cables
(For Front speakers)
≥2k10-m (33-foot) cables
(For Surround speakers)
Fit into groove. Place into groove.
Position wire in
grooves as necessary
avoiding knots.
Fit into groove. Place into groove.
Confirm screw
is securely
fastened.
Confirm screw
is securely
fastened.
Approx.
120 mm
(4
3 / 4
q)
8 Silver screws
Copper
Silver
Assembled
Copper
Silver
7708en.book 10 ページ ２００４年２月１４日 土曜日 午後３時２４分