Pioneer VSX-39TX - Manual (Page 58)

58
4
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
Preset Recall
DVD LD VCR TV
TAPE
CD-R DVR TUNER
STB CD MD
SELECT ITEM
BACK DVD/LD] [
1 Press the REMOTE SETUP.
The REMOTE SETUP menu appears on the remote
control's screen.
2 Press the PRESET RECALL button
on the remote control.
The step by step process will appear on the remote
control.
3 SELECT FUNCTION will appear on
the remote control. Choose the
button (for example, DVD/LD) you
want to assign to control the
component you want to operate
(the TUNER button cannot be
assigned).
Naturally it's easiest and most logical to assign the
button that has the same name as the component you
are setting up (for example, choose the CD button for
your CD player).
In some cases, however, you may need to assign a
button to a component with a different name.
For example, on button is marked MD/TAPE 1. If you
assign this button to your MD player you'll need to
use a different button, like VCR 2, for your tape deck.
4 Choose the component you want to
set up.
In the example in the diagram on the left, DVD was
selected in step 3. Thus, [DVD/LD] appears in the top
bar after Preset Recall.
Remote Control of Other Components
Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
LD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.
Recalling Settings Stored in the Remote Control
The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled
and the component assigned, you can use this remote to easily operate the component.
• You can press the BACK button at any time to go back a screen.
• See "Using Remote Control with Other Components" on pages
64 through 71 to operate your other
components.
memo
3
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
RECEIVER
2 1
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
KEY RENAME
ITEM MEMO
Remote Setup
LCD
COMMANDER
MULTI OPERATION
DIRECT FUNCTION
PRESET RECALL
LEARNING
BACK