Setup, Recording paper – Panasonic KX-FP155 User Manual

Page 13

Advertising

Setup

For fax advantage assistance, call 1-800-435-7329.

Recording paper

Note for recording paper:

●

Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or
paper used for resumes.

●

Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.

●

Avoid extremely smooth or shiny paper that is highly textured.

●

Avoid paper that is coated, damaged or wrinkled.

Note:

●

Avoid double-sided printing.

●

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the
paper may jam.

●

Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the
print quality.

Fan the stack of paper to prevent a paper
jam.

Pull the tension bar forward and hold open
while inserting the paper.

●

The paper should not be over the tab.

●

If the paper is not inserted correctly,
readjust the paper, or the paper may jam.

Tab

Recording
paper
entrance

Printing side
is back.

Tension bar

Stack of
paper

Correct

Incorrect

Adding paper

1. Pull the tension bar forward and hold open while

removing all of the installed paper.

2. Add paper to the removed paper and straighten.

3. Fan the stack of paper.

4. Pull the tension bar forward and hold open while

inserting the paper.

Tension bar

Letter, legal or A4 size recording paper can be loaded. The unit can hold up to 50 sheets of
60

to 75

(16 lb. to 20 lb.) paper or 30 sheets of 90

(24 lb.) paper.

Set the recording paper size (feature #16 on page 63) according to the paper size you use, after
connecting the unit (p. 14).
–To use legal size paper, please install an optional legal paper tray, Model No. KX-FA50

(p. 6, 12).

–To use A4 size paper, install the included A4 paper guide to the paper tray (p. 12).
For best results, only use inkjet paper such as Hammermill