Panasonic KX-FP155 - Manual (Page 62)

Features Summary
62
Basic features !
Programming table
Code
#01
To set the date and time.
SET DATE & TIME
PRESS SET
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 15 for details.
See page 16 for details.
See page 18 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
#02
To set your logo.
YOUR LOGO
PRESS SET
(Up to 30
characters)
Display & Feature Settings How the unit operates
#03
To set your facsimile telephone
number.
YOUR FAX NO.
PRESS SET (Up to 20
digits)
#04 To print and check the sending
report for fax transmission results
(p. 31).
SENDING REPORT
MODE=ERROR
[±]
ERROR
ON
OFF
(The default setting is in bold type.)
This setting is also available after
activating FAX ONLY mode (p. 39).
#06
To change the number of rings
before the unit answers a call
in FAX ONLY mode
FAX RING COUNT
RINGS=3
[±]
1, 2, 3, 4
To change the number of rings
before the unit answers a call
in TAD/FAX mode
TAD RING COUNT
RINGS=2
[±]
1, 2, 3, 4
TOLL SAVER
RINGER OFF
This setting is also available after
activating TAD/FAX mode.
See page 47 for details.
1. Press .
2. Press or until the desired feature
is displayed.
3. Press or until the desired setting
is displayed.
4. Press .
5. Press . MENU
SET
MENU
Note:
● Step 3 may be slightly different
depending on the feature.
● See page 61 for more details.
The following method of programming is applied except features #01, #02 and #03. For features
#01, #02 and #03, refer to the programming table below.