Pentax Optio V10 - Manual (Page 175)

173
9
App
e
nd
ix
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
Data being processed
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.
Green mode must be
canceled to use this
function.
This function is not available in Green Mode. Press the
Green button to cancel Green Mode. (p.66)
No image to be
processed This message appears when no image/sound file is
present.
This image/sound
cannot be processed This message appears when you attempt to edit a file that
cannot be processed.
No card in the camera
This message appears when an SD Memory Card is not
inserted and [Image/Sound Copy] is selected.
The card memory is not
enough to copy images/
sounds
This message appears when there is not enough memory
to copy to the SD Memory Card/built-in memory. Insert a
new SD Memory Card or delete unwanted images. (p.26,
p.118)
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
This message appears when Red-eye Compensation
cannot be performed correctly.
Low paper level in the
printer
The paper is running low in the printer.
Low ink level in the
printer
The ink is running low in the printer.
No paper in the printer There is no paper in the printer.
No ink in the printer There is no ink in the printer.
Printer error An error message has been sent from the printer.
Data error A data error message has been sent from the printer.
Paper stuck in the
printer
The paper is stuck in the printer.
Connection error Check
printer PictBridge connection failed. Check the connection and try
again. (p.138)
No image to be
processed This message appears when there are no images that can
be printed.
Wrong DPOF setting
This message appears when DPOF printing is not
available.