Pentax Optio V10 - Manual (Page 82)

80
4
Tak
ing Pi
cture
s
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5)
in A mode.
2
Use the four-way controller (5) to
select \ and press the 4 button.
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3
Press the four-way controller (23).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2
: for distant focus
3 : for closer focus
4
Press the 4 button.
The focus is fixed and the camera returns to capture status.
The focus position is fixed five seconds after you remove your finger
from the four-way controller.
After the focus is fixed, you can press the four-way controller (5) again
to display the \ indicator and readjust the focus using the four-way
controller (23).
• In s mode, you can only select =, q, r and 3.
• r cannot be selected in z and e modes.
• If you select =/q/r/\ in
d mode, you can only focus before
shooting.
Manual Focus 1Below
Saving the Focus Mode 1p.97
Manual Focus
Shooting mode and drive mode cannot be changed while adjusting \.
To switch from \ to another focus mode, press the four-way
controller (5) while the \ indicator is displayed.
F o c u s M o d e F o c u s M o d e F o c u s M o d e
M a n u a l F o c u s M a n u a l F o c u s M a n u a l F o c u s
OK O K O K O K
OK O K O K O K
2 2
5 5
1m 1m 1m
\ indicator