Philips SDR-S50 - Manual (Page 21)

21
VQT2L35
Preparation
Setup
3
Turning the unit on/off
You can turn the power on and off using the power button or by opening and closing the LCD
monitor.
Press the power button to turn on the power.
A The status indicator lights.
Power is turned on when the LCD monitor is opened, and power is turned off when it is
closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the power on/off.
∫ To turn on the power
A The status indicator lights.
∫ To turn off the power
B The status indicator goes off.
≥ In the following cases, opening the LCD monitor does not turn on the power. Press the
power button to turn on the power.
j When the unit is purchased
j When you have turned off the power using the power button
≥ The power will not turn off while recording motion pictures even if the LCD monitor is
closed.
Turning the power on and off with the power button
To turn off the power
Hold down the power button until the
status indicator goes off.
Turning the power on and off with the LCD monitor

SDRS50&H85GN-VQT2L35_mst.book 21 ページ ２００９年１２月２９日 火曜日 午前１０時３０分