Panasonic PT-D5500E User Manual

Page 4

Advertising
background image

1,600:1

Contrast

Contrast Mode

800:1

High

Low

2,500 lm

5,000 lm

1,250 lm

2,500 lm

Brightness

Normal Lamp

Long Life Lamp

Under Dual lamp condition

Dual

High

Lamp mode

Number of Lamp

Single

2,500 lm

1,250 lm

Low

High

Low

5,000 lm

4,000 lm

2,500 lm

2,000 lm

Brightness

Normal Lamp

Long Life Lamp

High Image Quality

Flexible System Applications

High Reliability and Easy Maintenance

Ultra Bright 5,000 Lumens

Lens-Centred Design

Liquid Cooling System

Dustproof Design with Sealed Optical Block

Dual Lamp System and Lamp Relay Function

Optional Long-Life Lamp

Easy Replacement of Dust Filter and Lamp

High 1,600:1 Contrast Ratio

High Uniformity of Brightness and Colour

A single-chip DLP

TM

design, liquid-cooling system and dual-lamp optical

system team up to achieve a brightness of 5,000 lumens.

This enables bright, large-screen projection even in well-lit condition.

Dynamic Sharpness Control

The Dynamic Sharpness Control circuit adjusts the video signal waveforms

based on the difference in brightness of adjacent pixels for a sharp,

clear picture that is relatively unaffected by signal noise.

A lens-centred, symmetrical design provides flexible system layout, eliminating

the need for any special considerations when planning the installation site.

Panasonic's newly developed liquid-cooling system directly cools

the DMD chip, which extends the PT-D5500E/EL's performance and attains

a high level of reliability.

The effect of dust has been minimised by completely sealing the optical block.

The dust-free design helps ensure that this DLP

TM

projector will continue to

deliver crisp, sharp, high-resolution images over an extended service life.

The use of two lamp systems increases brightness and eliminates the need to

interrupt a presentation if a lamp burns out (in dual lamp operation mode).

In single lamp operation mode, the lamp relay function greatly extends

continuous operating time.

A long-life lamp that stretches lamp life to 4,000 hours is available as an option.

In single lamp operation mode, the lamp relay function allows non-stop

operation 24 hours a day for up to 47 weeks without replacing the lamps.

The use of UHM lamps dramatically cuts operating costs.

Dust filter is replaced from the side

and lamps are replaced from

the back panel.

Both of them are replaced

very easily even if PT-D5500E/EL

is installed.

This high-contrast combines with an outstanding brightness for crisp,

high-resolution images in virtually any viewing environment. Contrast can

be switched between High and Normal as conditions require.

The PT-D5500E/EL's outstanding brightness and contrast ratio assures high

uniformity of brightness and colour, resulting in vivid and natural image.

Progressive Cinema Scan (3/2 Pulldown)

This interlace/progressive conversion technology automatically detects when

the input signal is derived from filmed material and selects the optimum

progressive processing method to assure faithful reproduction of

the original image.

Horizontal/Vertical Lens Shift

A wide adjustment range of

the horizontal/vertical lens shift

assures distortion free images and

adds convenience and versatility.

(Horizontal : manual, Vertical : powered)

V

50%

0

Screen centre

H

+10%

0

Screen centre

-10%

Lens removal bottom

Horizontal lens shift bottom
(Vertical : powered)

Lens-centred design

Advertising