Philips G-CODE 7819901511 - Manual (Page 21)

20
Using Tools: Timer Recordg
Normal Timer Recording
Before you start...
• Refer to ‘Using Tools: Record’.
..........................................................................................
1. On the Tools menu, press  to select ‘Timer
Record’, then press OK.
EasyAccess_EasyGuider_04_01
2. Press  to select ‘Date/Time Setting’, then press
OK.
EasyAccess_EasyGuider_04_02
3. Press  to select the signal source on which the
program you would like to record is being broadcast or
played, then press OK.
If you select ‘TV’, press  to select the channel
you want to record, then press OK.
4. Press  to select a recording frequency, then press
OK.
5. Press  to select a recording mode, then press OK.
Recording Mode (p.42)
6. Set the date, start time and end time one by one. Press
 or number buttons (0-9) to insert number,
and press OK to confirm your input before go to next
setting.
7. The Timer Program information will appear. Press OK
to exit the Timer Record setting.
EasyAccess_EasyGuider_04_03
Using Tools: Record
Before you start...
• Choose a recordable disc with enough space.
Check the disc types supported by the DVD recorder
you are using.
Discs Types Supported (p.4)
• Complete the channel scanning process for your TV.
Setting TV Channels (p.15)
..........................................................................................
1. On the Tools menu, press  to select ‘Record’,
then press OK.
EasyAccess_EasyGuider_03_01
2. Press  to select the signal source on which the
program you would like to record is being broadcast or
played, then press OK.
If you select ‘TV’, press  to select the channel
you want to record, then press OK.
3. Press  to select a recording mode, then press OK.
Recording Mode (p.42)
4. Press OK to start recording.
5. Press PAUSE/STEP to pause recording.
Press PAUSE/STEP again to resume recording.
Press  STOP to stop recording.