Philips CDR796 - Manual (Page 17)

SERVICE HINTS
5-1
SERVICE TOOLS
TORX T10 screwdriver with shaftlength 150mm ......................................4822 395 50423
TORX screwdriver set SBC 163 ..............................................................4822 295 50145
Audio signal disc SBC 429......................................................................4822 397 30184
Playability test disc SBC444 ...................................................................4822 397 30245
Test disc 5
(disc without errors) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A ....................................................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30dB level without "pause") ...4822 397 30155
HANDLING CHIP COMPONENTS
DEALER MODE
The sets are equipped with a special DEALER MODE.
This mode blocks the trays of the CD - and CDR module to
prevent customers from fetching out CDs from exhibition
sets.
The Dealer mode can be switched on/off as follows:
1) Switch the set with the Remote Control to [Standby]
2) Press the [DISPLAY] key at least for 5s
→ Display shows
TRAYS LOCKED else UNLOCKED
DEMO MODE
The DEMO MODE displays various features of the set and
will start automatically when no key has been pressed for
several minutes or during Standby mode.
The Demo mode can be switched on/off as follows:
1) Switch the set with the Remote Control to [Standby]
2) Press the [STOP] key on the set at least for 5s
→ Display shows
DEMO ON else DEMO OFF