Philips AZ 6188 - Manual (Page 11)

English
11
CD/MP3-CD
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored
in the memory in any order.
1. Press
9 to stop playback.
2. Press SEARCH ∞ or § to select the desired track, or for MP3-CD playback press
ALBUM 3 / 4 to select the desired album .
3. Press PROG to store the select track. “ XX” represents the track number.
• Repeat steps 1 to 3 to store other tracks.
4. Press 9 to end programme setting.
™ PROGRAM will remain on the display.
™You can press ∞ or § to view the programmed tracks.
5. Press 2; to play the programmed tracks.
• If you press MODE during program playback to activate REPEAT or REPEAT ALL function.
™ REPEAT/REPEAT ALL icon and PROGRAM will appear on the display.
6. Press twice to clear the programme.
™ PROGRAM will disappear from the display, and CLEAR will appear, followed by the
number of total tracks and the total playing time.
Note: -You can also press PROG to program tracks during normal playback
REPEAT
1. In the playback, pause or stop mode, press MODE to enable the REPEAT play function.
™ REPEAT - to repeat the current track.
™ REPEAT ALL - to repeat the whole disc
™ REPEAT ALBUM - to repeat the current album .
2. To exit the repeat mode, press MODE until the REPEAT/REPEAT ALL icon disappears.
Notes : - The Shuffle and Repeat play modes cannot be combined for playback.
- The Repeat play mode is cancelled when you press the STOP button.
SHUFFLE
You can play all the tracks in a random order.
1. In the playback, pause or stop mode, press MODE to enable the SHUFFLE function.
™ SHUFFLE will appear on the display.
2. To exit the shuffle mode, press 9 or MODE until SHUFFLE/SHUFFLE ALL disappears.
PROGRAMMING TRACKS
MODE
AZ6188_01_Eng(NEW) 4/22/04 16:52 Page 11