Panasonic N2QAYB000221 - Manual (Page 14)

14
■
Press to exit from
a menu screen
Auto channel setup
Select “Auto program”
First time setup
Language
Clock
Auto program
next
select
Select “ANT in”
Program channel
Cable ANT in
Auto
set
select
ANT in
Cable: Cable TV
Antenna: Antenna
Select “Auto”
Program channel
Cable ANT in
Auto
next
select
Select scanning mode (ALL channels/Analog only/Digital only)
Auto program
All channels
Analog only
Digital only
ok
select
Auto program
progress
Number of analog channels
Number of digital channels
8%
10
0
Press RETURN to quit.
RETURN
Start scanning the channels
Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
Confirm registered channels
Caption Favorite Add
Apply Cancel
program
... . Yes
... . Yes
... . Yes
select “Apply”
ok
If OK is not pressed after selecting “Apply”, the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the “Manual program” menu will also exit automatically.
If you perform scanning more than twice, previously saved channels are erased.
Note
About broadcasting systems
Analog (NTSC): Conventional broadcasting
Digital (ATSC): New programming that allows you to view more channels
featuring high-quality video and sound
First Time Setup
(Continued)