Panasonic N2QAYB000221 - Manual (Page 25)

25
Advanced
How to Use Menu Functions
(picture, sound quality
, etc.)
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only)
Sets favorite channels. (p. 17)
Displays Closed Caption. (p. 34) (Off/On)
Changes the station identifier. (p. 33)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 33)
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital Only/Analog only)
•
Favorite: Only channels registered as FAVORITE (p. 17)
Surf mode All
Selects the screen menu language (p. 13) Language
Adjusts the clock (p. 13) Clock
Sets channels (p. 32) Program channel
Selects the terminal and label of the external equipment (p. 35)
Controls equipment connected to HDMI terminals (p. 26) (On/Off)
•
“Power off link”, “Power on link”, and “Default speakers” cannot be selected if “Off” is set.
VIERA Link On
Sets “Power off link” of HDMI connection equipment (p. 26) (Set/No) Power off link Set
Sets “Power on link” of HDMI connection equipment (p. 26) (Set/No) Power on link Set
Selects the default speakers (p. 26) (TV/Theater) Default speakers TV
Turns TV On automatically when the cable box or a connected device is turned On (No/Set)
•
The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set.
(p. 36) Auto power on No
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Set/No)
Note
•
Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, or Digital channel.
•
“No signal shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by “No signal shut-off”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
No signal shut-off Set
To conserve energy, the TV automatically turns off when no operation of remote or side panel key
continues for more than 3 hours. (No/Set)
Note
•
Not in use when setting “Auto power on” or “On/Off Timer”.
•
“No action shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by “No action shut off”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
No action shut-off No
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room.
(Standard/Saving)
Power Save Standard
Set “On” you to play back SD cards automatically. (On/Off) Play SD card automatically On
Displays TV version and software license. About
Performing Reset will clear all items set with Setup, such as channel settings. (p. 32) Reset
(Continued)