Panasonic KX-PX10M - Manual (Page 95)

95
Others
Problem Cause and Remedy Page
Printing time is
unusually long. • Printing will require additional time when printing more
than 2 sheets in succession or when the printer’s
internal temperature is excessively high.
10
There is a noise
during printing. • The printer makes noise when the ink and paper are
being fed out during printing. This is normal.
—
The printer printed
a different number
of copies than
selected. • When printing using DPOF settings, only the number of
copies set by DPOF will be printed.
• Even if the number of copies has been set to each
image when selecting images, only one copy will be
printed if “All Images” or “ Index” is selected.
40
36
38
• Unsatisfactory
print quality
• Horizontal lines
appear across the
printed image.
• Are you using different paper than that which is
indicated?
Ÿ Insert the paper exclusive for this printer.
• Does the ink sheet have slack?
Ÿ Flatten out the ink sheet.
• Have you inserted the paper with the wrong side facing
up?
Ÿ Make sure that you insert the paper with the print side
(glossy surface) facing up.
• Print quality may be poor if there is condensation 1 due
to a difference in temperatures.
Ÿ Wait for approximately 2 hours from the time the
printer’s power was turned on before attempting to
resume printing.
• Are the thermal heads dirty?
Ÿ Clean the thermal heads 2
.
18
22
20
96
96
• Paper jams occur
frequently.
• Paper does not
feed.
• Have you loaded more than 18 sheets of paper (or
more than 20 sheets of wide size paper) in the paper
cassette?
Ÿ Reduce the number of sheets.
• Have you inserted curled paper?
Ÿ Do not use curled paper.
20
—
Continued on next page