Panasonic SC-PT565 - Manual (Page 7)

7
Sim
ple S
etu
p
Po
s
it
io
n
in
g
RQ
TX00
99
How you set up your speakers can affect the bass and the sound field. Note the following points:
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
[Note]
Keep your speakers at least 10 mm away from the system for proper ventilation.
Setup example
Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are
approximate.
≥
[PT865] : Using “Auto speaker setup” (
➜
33) is a convenient way to get the ideal surround sound from your speakers when you are unable to place
them.
(Continued on next page)
step 2
Positioning
[PT565] [PT560] :
Set your surround free!
Optional Panasonic wireless accessory (example: SH-FX67)
You can enjoy surround speaker sound wirelessly when you use the optional Panasonic wireless accessory (example: SH-FX67).
For details, please refer to the operating instructions for the optional Panasonic wireless accessory.
120°
60°
Front speakers
To allow for proper ventilation and to maintain
good airflow around the main unit, position it with
at least 5 cm of space on all sides.
Put on a rack or shelf. Vibration caused by the
speaker can disrupt the picture if it is placed
directly on the TV.
Place to the right or left of the
TV, on the floor or a sturdy
shelf so that it will not cause
vibration. Leave about 30 cm
from the TV.
Center speaker
Main unit
Subwoofer
Surround
speakers
[PT865]
Digital
transmitter
[PT865]
Wireless system
Place the wireless system
§
within approximately 10 m from
the main unit.
[PT865]
To avoid interference, maintain the following
distances between the wireless system and other
electronic devices that use the same radio frequency
(2.4 GHz band).
The wireless system will automatically seek a clear channel if any of these
other devices interfere with its communication. When this happens, the
wireless link indicator (“
[W1] ”) flashes on the main unit, and there is a brief
interruption in audio coming from the surround speakers.
This is the normal operation of the product working to assure the best
possible performance of your home theater system.
If the interference persists, try moving the other devices to another location
outside the range of the wireless system or move the wireless system
nearer to the main unit.
Wireless LAN:
approx. 2 m
Cordless phone and
other electronic devices:
approx. 2 m
Wireless
system
§ Do not use the wireless system or the digital transmitter in a metal cabinet or bookshelf.
e.g.
[PT565]
SC-PT560_860GN-RQTX0099-B_eng.book Page 7 Monday, January 28, 2008 10:23 AM