Philips 20HF - Manual (Page 6)

• Language: Select the language of the installation menu. Options are "ENGLISH" and
"MELAYU".
• Communication: The Communication option is for enabling interactive applications. For
more information consult the application notes. For stand-alone applications select “OFF”
option under the Communication sub menu.
Important! Do not select Iconn1 mode unless application is with Iconn 1 box. Once the TV
is set in Iconn1 mode, it will not respond to RC commands anymore. To regain control over
the TV, press any key (except the Power key) on the Set-Up remote for about 4 seconds and
while continuing to hold the key, press any key (except the Power key) on the local keyboard.
A message “IR Loopback” will appear momentarily to indicate that the set has been released
from Iconn1 mode.
• No. of Channels: This sub menu allows setting the number of TV, PAY-TV, Radio and
Info channels.
• Channel Install: In the Channel Install sub-menu, various channel settings can be set. Please
refer to the section on Channel Installation for further details.
• Configuration: In the Configuration menu, various settings and features of the TV can be
adjusted. Please refer to the section on Configuration for further details.
- 6 -