Pioneer Super Tuner IIID DEH-P5950IB - Manual (Page 20)

Black plate (20,1)
3 Press a or b to adjust the source vo-
lume.
+4 to
–4 is displayed as the source volume is
increased or decreased.
Notes
! The AM tuner volume level can also be ad-
justed with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press FUNCTION and hold until function
name appears in the display.
3 Press FUNCTION repeatedly to switch
between the following settings:
CALENDAR (date and clock)
—FM STEP (FM
tuning step)
—AM STEP (AM tuning step)—
WARNING TONE (warning tone)
—AUX1 (aux-
iliary input1)
—AUX2 (auxiliary input2)—
DIMMER (dimmer)
—S/W CONTROL (rear
output and subwoofer controller)
—
DEMONSTRATION (feature demo)
—
EVER-SCROLL (ever scroll)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down
FUNCTION until the unit turns off.
Setting the date and clock
Use these instructions to set the clock.
1 Press FUNCTION to select clock.
2 Press c or d to select the segment you
wish to set.
Day
—Month—Year—Hour—Minute
As you select segments of the clock display
the segment selected will blink.
<XRD7120-A/N>20
Operating this unit
En
20
Section
02