Pioneer Super Tuner IIID DEH-P5950IB - Manual (Page 26)

Black plate (26,1)
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner
’s
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
Introduction of advanced
operations
You can use COMP/DBE (compression and
DBE) only with a multi-CD player that supports
them.
Function mode 1
% Press FUNCTION repeatedly to switch
between the following functions:
REPEAT (repeat play)
—RANDOM (random
play) —SCAN (scan play)—ITS-PLAY (ITS play)
—PAUSE (pause)—COMP/DBE (compression
and DBE)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Function mode 2
% Press FUNCTION and hold repeatedly to
switch between the following functions:
TITLE IN (disc title input)
—ITS (ITS program-
ming)
# To return to the playback display, press BAND.
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
COMP/DBE and TITLE IN operations are basi-
cally the same as that of the built-in CD player.
Function name Operation
REPEAT
Refer to Selecting a repeat play
range on page 12.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
as below:
! MCD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
RANDOM
Refer to Playing tracks in random
order on page 12.
SCAN
Refer to Scanning folders and
tracks on page 12.
ITS-PLAY
Refer to Using ITS playlists on the
next page.
PAUSE
Refer to Pausing disc playback on
page 12.
COMP/DBE
Refer to Using compression and
BMX on page 12.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
of BMX.
The settings can be switched as
below:
OFF
—COMP 1—COMP 2—OFF—
DBE 1 —DBE 2
TITLE IN
Refer to Using disc title functions
on page 28.
ITS
Refer to Using ITS playlists on the
next page.
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to
TITLE IN. The disc title has already
been recorded on a CD TEXT disc.
<XRD7120-A/N>26
Available accessories
En
26
Section
03