Plantronics CT10 - Manual (Page 11)

6
SELECTING A LOCATION
Install the CT10 Base Unit
in a location that is near an AC power outlet
and a modular telephone line jack. The base’s location effects the
telephone’s range. Try several locations to see which provides the best
performance. Select a location that is away from electrical machinery,
electrical appliances, metal walls, filing cabinets, wireless security alarms,
room monitors, and areas of excessive moisture.
GETTING STARTED
Unpack the unit and check for the following items:
CT10 Remote
Rechargeable Battery
CT10 Base
AC Adapter
Telephone Line Cord
Headset
CONNECTING THE TELEPHONE BASE
Place the Base
on its back exposing the AC Adapter Jack and
Telephone Jack on its underside.
Plug the AC Adapter Plug into the AC Adapter Jack . Plug the AC
Adapter into an AC power outlet. The Power Indicator will light
after being connected. The In-Use Indicator will remain off.
Connect one end of the Telephone Line Cord into the Base’s Telephone
Jack and the other end into a Telephone Wall Jack .
Press both the Telephone Line Cord and the AC Adapter Cord into the
Cord Retainer Clip .
G
A
STEP 1
A
G
G
GENERAL SETUP