Programming with ’videoplus, Selecting a tv channel, Volume control – Philips 14 PV 274 User Manual
Page 2: Picture control
&
Programming with ’VIDEOPlus+’
All the information required for programming is contained encoded in the ’VIDEOPlus+’ code.
1
Press the
SV/V+
button on the remote control.
2
Enter the entire ’VIDEOPlus+ code’. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the
CLEAR b
button.
3
If you want to repeat programming at daily or weekly intervals, select the required settings in
the ’DAILY/WEEKLY’ line.
’Daily’ programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
4
After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPlus+ for the first time, the ’PROGRAMME NR.’ line appears when you
enter the VIDEOPlus+ code. Enter the required programme number.
DATE DW PR START END
d
01
01 17:15 18:45
v w x y 0-9
OK
5
Confirm with the
OK
button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
6
Press the
STANDBY m
button.
How to enter, check or clear a TIMER-block manually
1
Press the
TIMER k
button.
2
Select a free TIMER block or the TIMER block you want to check or clear.
3
Clear: Press the
CLEAR b
button.
4
Enter/Check: Press the
D
or
C
menu button to switch between ’DATE’ (date), ’DW’ (daily,
weekly), ’PR’ (programme number), ’START’ (start time) and ’END’ (end time).
Press the
A
and the
B
or the
0-9
buttons to change the data.
5
To end programming, press the
MENU
button.
6
Press the
STANDBY m
button.
Selecting a TV channel
Select the required TV channel (= programme number) with the
P p
button or the
0-9
buttons on the remote control.
The selected programme number (e.g.: ’P 01’ ) appears in the upper right corner of the TV screen.
Volume control
You can control the volume level with the
Sp
button. If you want to mute the sound tem-
porarily (e.g.: during a telephone call), press the
MUTE y
button on the remote control. When
you press it again, the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpness and colour here.
1
Press the
MENU
button.
2
Select and confirm the line ’PICTURE’ .
3
Select and confirm the TV screen setting.
Note:
* In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.