Philips SCD497 - Manual (Page 6)

6
introduction
Philips Avent is dedicated to producing caring, reliable products that give parents the reassurance
they need. This Philips Avent baby monitor provides round-the-clock support by ensuring you can
always hear your baby clearly without any distracting noise. The DECT technology guarantees zero
interference from other wireless appliances and a clear signal between the baby unit and parent unit.
general description (Fig. 1)
A Baby unit
1 On/off button 3
2 ON light
3 Volume +/– buttons
4 Battery check light T
5 Nightlight
6 Nightlight button Q
7 PAGE button
8 Microphone
9 Adapter
10 Large appliance plug
11 Battery compartment lid
12 Socket for large appliance plug
13 Battery compartment
B Parent unit
1 TALK button
2 LINK light
3 SENSITIVITY button
4 On/off button 3
5 Opening for belt clip
6 Sound level lights
7 Volume +/– buttons
8 Battery check light T
9 Microphone
10 Loudspeaker
11 Battery compartment
12 Belt clip
13 Battery compartment lid
14 Adapter
15 Small appliance plug
16 Socket for small appliance plug
important
Read this user manual carefully before you use the appliance and save it for future reference.
This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult
supervision and should not be used as such.
Check if the voltage indicated on the adapters of the parent unit and baby unit corresponds
to the local mains voltage before you connect the units.
Use and store the appliance at a temperature between 10°C and 0°C.
The appliance is suitable for mains voltages from 0 to 0V.
Do not expose the baby monitor to extreme cold or heat or to direct sunlight.
Make sure the baby unit and the cord are always out of reach of the baby (at least 1 metre/
feet away).
Never place the baby unit inside the baby’s bed or playpen.
,
,
,
,
,
,
,
EngliSh