Panasonic SC-PM10 - Manual (Page 17)

RQT6682
17
Listening operations
Recording CDs
Normal recording
• Tracks are recorded in the order in which they are found
on the CD.
• Tracks are cut in the middle when the end of the tape is
reached.
• You can record from any point on the tape.
1
Insert the cassette to be recorded on.
( \ page 15)
2
Press [STOP L ] to select the CD mode.
3
Press [OPEN/CLOSE c ] to open the CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE
c c c c c ] to close the CD tray.
4
Press [ [ REC/ J ] to start recording.
The recording will start from the first track.
To stop recording
Press [STOP
L ].
The recording and the CD will stop.
To stop recording temporarily
Press [
[ REC/ J ].
To resume recording, press [ [ REC/ J ].
To record from a specific point on a tape
Before recording, advance the tape to the point from where
you want to start recording.
To record programmed tracks
1 After step 3, program the track(s) you want ( \ steps 2-4
on page 14).
2 Press [ [ REC/ J ] to start recording.
2
3
4
4
2
3
STOP
OPEN CLOSE
REC
Recording operations
REC
RQT6682(11-24)NEW.P65 3/24/05, 12:06 PM 17