Philips HES4900/12 - Manual (Page 26)

27
Note
Philips does not guarantee 100% interoperability with ‡
all HDMI CEC devices.
[EasyLink]
‡ [Auto Wakeup TV] - Turn on or off
one touch play.
‡ [System Standby] - Turn on or off one
touch power-off.
‡ [System Audio Control] - Turn on or
off one touch audio play.
[Display Dim]
Turn on or off adjustment of display brightness
level.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
‡ [On] – Enable the screen saver.
‡ [Off] – Disable the screen saver.
[Sleep Timer]
Switches to standby automatically after the
preset time.
‡ [15 mins], [30 mins], [45 mins], [60
mins] – select the count down time
before the apparatus switches to
standby.
‡ [Off] – disable sleep mode.
Switch to standby mode
[Standby Mode]
Set the standby mode.
‡ [Normal] - power consumption <4W.
‡ [Low Power] - power consumption
:+RZHYHULWUHTXLUHVORQJHUWLPH
to power up.
>'LY; 5 92'&RGH@
'LVSOD\WKH'LY;ŠUHJLVWUDWLRQFRGH
7 Adjust settings
1
Press OPTIONS .
2
Select a setup page.
3
Select an option and then press .
4
Select a setting and then press OK.
To return to the previous menu, press ‡
.
To exit the menu, press ‡ OPTIONS .
General setup
On [General Setup Page], you can set the
following options:
[Disc Lock]
6HWSOD\UHVWULFWLRQIRUVSHFLÀFGLVFV%HIRUH\RX
start, place the disc in the disc compartment
(maximum 40 discs can be locked).
‡ [Lock] – Restrict access to the
current disc. You need to enter a
password to unlock and play the disc.
‡ [Unlock] – Play all discs.
Tip
To set or change the password, go to ‡ [Preference
Setup] > [Password].
[OSD Language]
Select the preferred language for on-screen
display.
This unit supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
English
EN