Pharos Science & Applications 140 - Manual (Page 12)

Pharos Drive GPS 140 12 Chapter 3 Using the Drive GPS 140
Pharos
Chapter 3 Using the Drive GPS 140
3.1 Drive GPS 140 Operating Basics
After fully charging the Drive GPS 140, it is ready to be used. You can now
turn it on to calibrate the screen. After screen calibration, proceed to system set-
tings configuration.
3.2 To turn on and calibrate the device:
1. Turn on your device the first time by turning on the main on/off switch on
the bottom of the device. You will use the power button on the top right
panel of the device for daily use (and always keep the main on/off switch
on, unless storing the device for longer periods of time).
Figure 6: Main on/off switch and power button
2. Tap the center of the target as it moves around the screen.
After calibrating the screen, the Main Menu panel displays.
NOTE: When you first turn on your device, you will be asked to calibrate the
screen. This process ensures the accuracy of the touchscreen when used.