Pharos Science & Applications 140 - Manual (Page 23)

Pharos Drive GPS 140 23 Chapter 5 Contacts Management
Pharos
2. Tap on the space to enter the related information for the new contact.
3. Enter other address and contact information
4. Tap “SAVE” to save the new contact.
5.1.4 Editing contact information
1. In the Contacts control pad, tap the contact you wish to edit.
2. Tap Edit.
3. Enter the new information for the contact.
4. Tap “SAVE” to save the new contact.
5.1.5 Navigating to a contacts address
1. In the Contacts control pad, tap the contact whose address you want to nav-
igate to.
2. Tap GPS
Address entries for the selected contact appears.
3. Tap the address you want to navigate to.
4. Tap Navigate.
The calculated route is shown on the map as a blue line from your current GPS
position.
5.1.6 Importing contacts to your Drive GPS 140.
1. Make sure there is a SD storage card in the device.
Imported contact file(s) will be saved to this storage card for access by your
Drive GPS 140.
2. Tap in the Contacts control pad.
3. Select contact files (.cs) you want to import (previously set up by Active-
synch with Outlook contacts). Selected the contact(s) that will be imported
to the SD card installed in your device.
4. Click OK on the completion dialog box.