Panasonic EW3002 - Manual (Page 9)

16 15
About the Precise Logic™ Measurement System
The blood flow (pulse wave) which influences blood pressure monitors varies
according to the conditions of the blood vessels and the structure of the arm,
making measurements by conventional methods difficult in some cases. For
more consistent, accurate results, this device employs a Precise Logic™
measurement system that verifies both the height and width of the pulse wave
in order to reliably measure blood pressure.
By using the Precise Logic™ measurement system, measurement reliability
and accuracy have been improved.
Old Technology
Relies only on Pulse
Height
Panasonic Technology
Double Check Measurement System
Checks both Pulse Height
and Pulse Width
Care and Maintenance
1. Use a dry, soft cloth to clean the device. If desired, use a cloth lightly
dampened with tap water and a mild detergent to clean the device.
DO NOT use alcohol, benzene, thinner or other harsh chemicals to clean
the device or cuff.
2. When the unit will not be used for a long time (30 days or more), be sure to
remove the batteries. Otherwise, the batteries may leak and damage the
unit.
Storing the Monitor
Fold the pressure cuff as shown in Fig. 17 and place the monitor into the hard
carrying case.
Fig. 17
1 2 3