Panasonic KX-FP85AL - Manual (Page 61)

63
62
62
62
62
63
63
Answering Device
Remote Operation
Notice of Remote Operation
Fold here
1. Call your unit.
2. Enter the remote operation
ID during the
greeting message.
● The new messages will
be played automatically.
● If there are no new
messages, wait for 4
seconds. All the
messages will be played
back.
3. Press the remote command
key(s) within 10 seconds
(see the reverse side).
● The remote operation is
available only from a touch
tone telephone when the
unit is in the TAD/FAX mode.
● When the unit is in the TEL
mode, call your unit and wait
for 10 rings. Enter the
remote operation ID within 8
seconds and wait for 3
seconds. The unit will switch
to the TAD/FAX mode.
● When you press a key,
press firmly.
● To send a document, press
. When a fax tone is
heard, start transmission.
9
61
Remote Operation (KX-FP85 only)
Remote operation card
Please copy, cut out and carry this card for assistance when using the remote operation.
Operating from a remote location !
Stops re-recording of a greeting
message
Erases a specific message
Erases all messages
Changes to the TEL mode
Turns ON message transfer
Turns OFF message transfer
Turns ON pager call
Turns OFF pager call
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 68) and set the unit to the TAD/FAX
mode before going out (p. 54).
Remote command Dial key Page Dial key Remote command Page
Skips the greeting message
Repeats a message
Skips a message
New message playback
All message playback
Room monitor (KX-FP85AL only)
Re-records a greeting message 8 4
8 3
8 2
8 1
8 0
5
4
9 63
63
63
63
63
63
63
63 7
6
5
4
2
1
0