Panasonic DMR-ES35V - Manual (Page 50)

50
RQTV0134
Transferring (Copying)
When connecting the IN2 input terminals on the front of the unit
≥You can also connect to the IN1 input terminals on the rear of the
unit.
Notes
≥When recording using the unit’s input terminals, only the sound
received at the time of recording will be recorded. As long as
secondary audio that is recorded on the media in the external
device is not output to the unit in play, it is not recorded.
≥If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
≥The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
DVD
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
≥Release protection (disc l 53, cartridge l 53). [RAM]
≥Select DVD side with pressing [DRIVE SELECT].
VHS
≥Insert a video cassette with an accidental erasure prevention tab.
( l 22)
≥Select VHS side with pressing [DRIVE SELECT].
[1] Press [REC MODE] to select the recording
mode.
(DVD l 24, VHS l 24)
≥DVD [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
- It is also possible to perform Flexible Recording (FR). ( l 27)
[2]
While stopped
Press [CH, W, X] or [INPUT SELECT] to select
the input channel for the equipment you have
connected.
≥Select IN1 or IN2.
Follow the above steps 1 to 2.
[3] Start play on the external device.
[4] Press [ ¥ , REC] at the point where you want to
start recording.
Follow the above steps 1 to 2.
[3] Press [ 1 , PLAY].
≥Start playing the video cassette and find the recording start
point.
[4] Press [ ; , PAUSE], then press [ ¥ , REC].
≥Put the unit in recording standby mode.
[5] Start play on the external device.
[6] Press [ ; , PAUSE] at the point where you want
to start recording.
∫ To skip unwanted parts
Press [ ;, PAUSE] to pause recording. (Press again to restart
recording.)
∫ To stop recording
Press [ ∫ , STOP].
For your reference
≥Almost all videos and DVD software on sale have been treated to
prevent illegal copying. Such software cannot be recorded.
[RAM] [-R] [-RW‹V›] [+R] [+RW]
Programs are recorded as a title while at the same time chapters are
created at each break in the images and the playlist is created
automatically.
[RAM]
Preparation
≥Turn on the main unit and DV equipment.
≥Select the type of audio recording from “Select Audio Channel for
DV Input” in the Audio menu. ( l 57)
When recording from DV equipment (e.g., digital video
camcorder), you can record audio/video recordings from DV tape
only.
≥Pause play on the DV equipment at the point you want recording to
start.
≥Press [REC MODE] to select the recording mode.
[1] While stopped
Press [FUNCTIONS].
[2] Press [ 3, 4] to select “Other Functions” and
press [ENTER].
[3] Press [ 3, 4] to select “DV Camcorder Rec.”
and press [ENTER].
[4] Press [ 2, 1] to select “Rec.” and press
[ENTER].
When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV
automatic recording.
To stop recording
Press [
∫, STOP]. The confirmation screen appears. Press [ENTER].
Notes
≥Only one piece of DV equipment (e.g., digital video camcorder)
can be connected to the unit via the DV IN terminal.
≥If you use video camcorders from other manufacturer’s these are
not guaranteed to work.
≥If the DV equipment is in a mode for operating the SD card, it is not
possible to record with “DV Camcorder Rec.”.
≥It is not possible to operate the unit from the connected DV
equipment.
≥The DV IN terminal on this unit is for use with DV equipment only.
(It cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape in the DV equipment will
not be recorded.
≥You cannot record and play simultaneously.
Before connecting any cables, first make sure that the power
for the unit and the external device are off. Then, after
connecting cables, turn on both.
Recording from an external device
DVD
VHS
(2) (1)
(4)
(3)
S VIDEO IN 2 VIDEO /MONO AUDIO R L
(1) S-Video cable (not supplied)
(2) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(3) DV cable (IEEE 1394 4-pin, not supplied)
(4) External device (Playback equipment)
DV camcorder recording
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for Recording
from an external device (
lleft).
M6VP&PC.book 50 ページ ２００６年２月６日 月曜日 午後３時２０分