Panasonic DMR-ES35V - Manual (Page 63)

63
RQTV0134
Picture Page
Sound Page
TV reception worsens after
connecting the unit. ≥This can occur because the signals are being divided between the unit and other equipment. It can
be solved by using a signal booster, available from audio-visual suppliers.
–
The images from the unit do
not appear on the TV.
Picture is distorted.
≥Make sure that the TV is connected to the VIDEO OUT terminal, S VIDEO OUT terminal or
COMPONENT VIDEO OUT terminals on the unit.
≥Make sure that the TV’s input setting (e.g., VIDEO 1) is correct.
≥The TV isn’t compatible with progressive signals. Press and hold [∫] and [“ DVD] on the main unit at
the same time for about 5 seconds. The setting will change to interlace.
13–15
–
–
Status messages do not
appear. ≥Select “Automatic” in “Status Messages” in the Setup menu. 58
The blue background does
not appear. ≥Select “On” in “Blue Background” in the Setup menu. 58
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in the
Video menu to “Off”.
≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video”, or “4:3 TV Settings for DVD-
RAM” in the Setup menu.
37
58
There is a lot of after-image
when playing video. ≥Set “DNR” in the Video menu to “Off”. 37
When playing DVD-Video
using progressive output,
one part of the picture
momentarily appears to be
doubled up. ≥Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or
material used on DVD-Video, but should be corrected if you use interlace output.
37
There is no apparent change
in picture quality when
adjusted with the Video menu
in the on-screen menus. ≥The effect cannot be seen with certain types of video. –
No sound.
Low volume.
Distorted sound.
Cannot hear the desired
audio type. ≥Check the connections and “Digital Audio Output” settings. Check the input mode on the amplifier if
you have connected one.
≥Press [AUDIO] to select the audio.
≥Set “V. Surround Sound” in the Audio menu to “Off” in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast titles.
15, 57
25, 31
37
Cannot switch audio. ≥You cannot change the audio type when a DVD-R, a DVD-R DL, a DVD-RW (DVD-Video format), a
+R, a +R DL or a +RW is in the disc tray.
≥You cannot change the audio type when playing a DVD-R, a DVD-R DL, a DVD-RW (DVD-Video
format), a +R, a +R DL or a +RW. (You can select “Main” or “Secondary Audio Program (SAP)” in
“Multi-channel TV sound (MTS)” in the Setup menu before recording.)
≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio cables
(analog connection).
≥There are discs whose audio cannot be changed because of how the disc was created.
–
57
15, 57
–
T
roub
le
s
hooting guide
M6VP&PC.book 63 ページ ２００６年２月６日 月曜日 午後３時２０分