ProForm T10.0 PFTL05051 - Manual (Page 6)

6
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Assembly requires the following tools: The included allen wrench , two adjustable wrenches (not
included) , and a phillips screwdriver (not included) .
1. Firmly hold one of the Uprights (15 or 46) with both
hands. Raise the Uprights about halfway.
Place one foot against the base, as shown in drawing 1b.
Carefully raise the Uprights (15, 46) until the base is rest-
ing on the floor.
2. Pivot the Console (17) upward until it stops. Using the in-
cluded allen wrench, tighten a 3/8” x 1 1/4” Bolt (45) into
each Upright (15, 46).
2
46
17
45
45
15
1a
1b
15
46
Base
46
15