Panasonic DMC-FX01 - Manual (Page 65)

Menu Settings
65
VQT0V86
• ISO sensitivity is automatically set to the
optimal value between [ISO800] and
[ISO1600] in [HIGH SENS.] (P52) scene
mode.
• To avoid picture noise, we recommend
decreasing the ISO sensitivity or setting
[PICT.ADJ.] to [NATURAL]. (P69)
• ISO sensitivity cannot be set in scene
mode, motion picture mode [ ] and
simple mode [ ].
Press [ ] to display the [REC] mode
menu and select the item to set. (P62)
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
• In motion picture mode [ ], you can
select [ ] or [ ].
• The ends of the recorded pictures may be
cut at printing. (P97)
Press [ ] to display the [REC] mode
menu and select the item to set. (P62)
A digital picture is made of numerous dots
called pixels. Although you cannot see the
difference on the camera’s screen, the
more pixels the finer the picture will be
when it is printed on a large piece of paper
or displayed on a PC monitor. Picture
quality refers to the compression rate when
saving digital pictures.
A Many pixels (Fine)
B Few pixels (Rough)
¢ These pictures are examples to show the
effect.
[ASPECT RATIO]
Setting the aspect ratio of pictures
Select to take pictures with the
same aspect ratio as a 4:3 TV or a
PC monitor.
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.
/SET
MENU
This is suitable for landscapes etc.
where a wide view is preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-definition TV etc.
[PICT.SIZE]/[QUALITY]
Setting a picture size and quality
that matches your use of the
pictures
/SET
MENU
VQT0V86ENG.book 65 ページ ２００６年１月３０日 月曜日 午前９時４６分