Panasonic SuperTooth II - Manual (Page 3)

CHARGING THE SUPERTOOTH II
SuperTooth II can he charged in a car using the SupetTooth II Saver Charger or at home
using the Travel charger.
1. Connect the charger's plug into the
Charger Input (5) of SuperTooth II.
Charge Indicator(l0) Status:
Steady Red: low batt
Steady Green: fully charged
Alternate Red/Green indicates charging
2. When fully charged, disconnect the
charger.
Bluetooth Indicator(9) Status: Blinking Blue: standby(when Swivel Arm is open
at 55° to 210° positions).
TURNING ON/OFF THE SUPERTOOTH II
1. To turn SuperTooth II on, just flip up the Swivel Arm (1) at 55° to 210° positions. The
Bluetooth indicator will glow (Blue pink). This indicates that the kit is ready (standby
mode).
Note: At first use, the user has to pair SuperTooth II with his phone (refer to
PROCEDURE OF PAIRING TO THE MOBILE PHONE).
2. To turn SuperTooth II off, just flip down the Swivel Arm to 0° position. The Bluetooth
Indicator will become red then will turn off after a second.