Panasonic SuperTooth II User Manual

Page 6

Advertising
background image


ANSWERING A CALL

When the phone receives a call, ring tone is possible on SuperTooth II and at the same
time on the telephone (depending on your phone model).

1. Just

shortly

press

Pick-Up/Hang-Up Button(7) to answer the call.

2. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate

the call.


MAKING A CALL USING THE SUPERTOOTH II

Normal dialing

1. Enter the contact number and send. Normally, audio will be on the kit.

Note: With some phones like Siemens S55; Panasonic X70, audio is always
on the phone during an outgoing call. You will need to press Pick-Up/Hang-
Up Button(7)
to transfer the audio to your kit. (Also refer to "Compatibility
Table"
for other helpful remarks.)

2. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate

the call.


Voice dialing

1. First you have to access the voice dialing function of your phone, turn it on and

record for a voice name or voice tag. (Kindly refer to the procedure in your
phone's manual.)

Note: Voice dialing entries must be stored in the phone's memory, not on
the SIM card!

When done, execute voice dialing on your kit by proceeding with the instructions.

2. Shortly

press

Pick-Up/Hang-Up Button(7).

3. A beep will then be heard on the SuperTooth II prompting the user to say a voice

name or voice tag of a person to call.

4. Say the name. The name will be played back to you (audio on kit). The phone will

then place the call automatically.

5. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate

the call.

Note: Noisy environment could affect voice recognition. Record your voice in a quiet
environment.


Redialing (Handsfree profile only)
Make a long press on the Pick-Up/Hang-Up Button(7). Audio will be on the SuperTooth II.

Advertising