Philips AZ3856 - Manual (Page 15)

7 Other features
Record
Note
To record, use only “Normal” (IEC type I) tapes on which the write-protect notches (tabs) are
•
not broken.
Tip
When you play or record a tape, the sound source cannot be changed.
•
The best recording level is set automatically. Change of volume and sound effect does not
•
affect recording.
Note
The quality of recorded sound can differ depending on the source and the tape used.
•
Record from CD to tape
1 Press CD to select disc source.
2 Load a disc.
3 Stop disc playback.
4 Press to open the tape door.
5 Load a tape.
6 Press to start recording.
Disc play starts automatically from the beginning of the disc. »
To pause/resume recording, press
•
.
To stop recording, press
•
.
Record a section of a disc to tape
1 During disc play, press and hold / to search, then release the button.
To select a track, press
•
/ .
2 Press to pause disc play.
3 Press to start recording.
Disc play resumes automatically. »
To pause recording, press
•
. To resume, press this button again.
To stop recording, press
•
.
Record from radio to tape
1 Tune to the desired radio station.
2 Open the tape button cover.
3 Press to open the tape door.