Philips CED1900BT - Manual (Page 14)

12 EN
4 Get started
Caution
•
Risk of car accidents! Never watch video or operate
this system while driving.
Prepare the remote control
For the first time use
Pull the protective sheet out.
» The remote control is ready for use.
Replace the battery
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Note
• Remove the battery if it is exhausted or if the remote
control is not to be used for a long time.
•
Batteries contain chemical substances, they should be
disposed of properly.
• Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1
Pull out the battery tray.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Insert the battery tray.
Turn on
Press .
» PHILIPS logo and a progress bar are
displayed while boot-up.
• To turn off the system, press and hold
for 3 seconds.
For the fist time use
After successful boot-up, the following interface
is displayed.
1
Tap to select a language for on-screen
display.
» The following interface is displayed.