Panasonic WV-CW244FE - Manual (Page 8)

-8-
t Azimuth adjuster
Adjusts the azimuth angle to obtain a level image.
y Pan lock screw
Fixes the panning position after adjusting.
u Video jack (3.5-diam. mini jack)
For connecting an LCD monitor to adjust the cam-
era images. Use an L-type plug to save space.
i Aperture Level Selector
SHARP: Sharpens the image outline.
SOFT: Softens the image outline.
The default setting is SHARP.
o Back Light Compensation Selector
ON: Compensates the background if it is brighter
than the object.
OFF: Does not compensate.
The default setting is OFF.
!0 Synchronization Mode Selector
Specifies a source for synchronization.
INT: Internal 2:1 interlace.
LL: Line-lock mode driven by 24 V AC or 220 V-240
V AC.
The default setting is INT.
Note: Do not set the switch to LL (Line-Lock) posi-
tion when supplying 12 V DC to avoid synchro-
nization error.
!1 Heater power connector
Supplies power to the optional heater unit when it is
built in the camera. Connect here a harness stick-
ing out from the heater unit.