Pride Mobility Microdrive Controller INFMANU2581 - Manual (Page 12)

12 Basic Operation Instructions
Microdrive Controller www.pridemobility.com
Horn Key
The horn key activates the horn.
Battery Condition Meter
The battery condition meter is a 10-segment illuminated display that indicates that
the Microdrive is powered on and also gives the status of the batteries, the con-
troller, and the power chair electrical system.
!
! ! ! ! Red, yellow, and green lights lit: Batteries charged; controller and electrical
system OK.
! ! ! ! ! Red and yellow lights lit: Charge batteries if possible; controller and electrical
system OK.
! ! ! ! ! Red lights only lit or slow flash: Charge batteries as soon as possible;
controller and electrical system OK.
! ! ! ! ! Rapid flash of lights: Indicates a fault in the controller or the electrical system.
See “Error Codes.”
! ! ! ! ! Ripple side to side of lights: The joystick was not in the neutral position
when the controller was turned on. If you get “ripple side to side of lights,”
turn off the controller, allow the joystick to return to the neutral position, then
turn on the controller.
NOTE: If you have attempted to resolve the problem and still get “ripple
side to side of lights,” contact an authorized Pride Provider.
NOTE: When the batteries approach a discharged state, the first red light will
begin to slowly flash, reminding you the batteries need to be charged immedi-
ately!
Profile and Speed Indicator
The profile and speed indicator is a 5-segment illuminated display that indicates
speed setting as well as drive profile.
Actuator Indicator
The actuator indicator is a 4-segment illuminated display that indicates power
recline, power tilt, power leg rest, and power elevating seat actuator modes.