ProForm 785 S - Manual (Page 19)

19
Inspect and properly tighten all parts of the elliptical
exerciser regularly. Replace any worn parts immedi-
ately.
PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper-
ly, see step 5 on page 9.
CONSOLE TROUBLESHOOTING
If turning on the fan resets the console displays, or if
the displays becomes dim, the batteries should be
replaced. Most console problems are the result of low
batteries. See assembly step 7 on page 6 for replace-
ment instructions.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical
exerciser rocks
during use,
turn one or
both of the lev-
eling feet
under the rear
stabilizer until
the rocking
motion is elimi-
nated.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han-
dlebars firmly, and place one foot against one of the
wheels. Pull the handlebars until the elliptical exercis-
er can be moved on the wheels, and carefully move
the elliptical exerciser to the desired location. Then,
place one foot against a wheel, and lower the elliptical
exerciser. Due to the size and weight of the ellipti-
cal exerciser, use extreme caution while moving
and lowering it.
MAINTENANCE AND TROUBLESHOOTING
Leveling
Foot
Handlebars
Wheel