4 connect your home theater – Philips HTS2200 User Manual
Page 8
6
c
AUDIO IN-AUX
Connects to the analog audio output on the
TV or an analog device.
d
VIDEO OUT - VIDEO
Connects to the composite video input on
the TV.
e
VIDEO OUT - Y Pb Pr
Connects to the component video input on
the TV.
f
FM ANTENNA
Connects the FM antenna for radio
reception.
Connect to the TV
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
a
Component video
b
Composite video
Option 1: Connect to the TV through
YPbPr (component video)
Note
The component video cable or connector
•
might be labeled Y Cb Cr or YUV .
(Cable not supplied)
Component Video Out
Component Video In
TV
4 Connect your home
theater
This section helps you connect your home theater
to a TV and other devices. The basic connections
of the home theater with its accessories are
provided in the Quick Start. For a comprehensive
interactive guide, see www.connectivityguide.
philips.com.
Note
Refer to the type plate at the back or bottom
•
of the product for identifi cation and supply
ratings.
Before you make or change any connections,
•
ensure that all devices are disconnected from
the power outlet.
Connectors
Side connectors
a
( USB )
Audio, video or picture input from a USB
storage device.
Back connectors
a
AC MAINS~ (
)
Connects to the power supply.
b
SPEAKERS
Connects to the supplied speakers and
subwoofer.
EN
1_HTS2200_93-EN-US.indd Sec1:6
1_HTS2200_93-EN-US.indd Sec1:6
7/19/2010 1:42:27 PM
7/19/2010 1:42:27 PM