Philips AX2420 User Manual

Page 3

Advertising
background image

GENERAL INFORMATION / CD PLAY

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage
converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car adapter
cassette. Any other product may damage the set.

1

Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.

2

Plug the voltage converter into the
cigarette lighter socket (only for 12 V car
battery, negative grounding),
then connect
the wired end with 4.5V DC input socket on the
set.

3

If necessary, clean the cigarette lighter socket
to obtain a good electrical contact.

4

Turn down the volume and connect the cassette adapter plug to
p

/LINE OUT on the set.

5

Carefully insert the cassette adapter into the car radio’s cassette compartment.

6

Make sure the cord does not hinder your driving.

7

Decease the volume on the set, if necessary. Start playback on the set and
adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter socket

when the set is not in use.

Note: If your car radio has a LINE IN socket , it is better to use it for the

car radio connection instead of the cassette adapter. Connect the signal
lead to this LINE IN socket and to
p/LINE OUT on the set.

4,5 V DC

12 V DC

In-car use (connections supplied or optionally available)

CD PLAY / FEATURES

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, NF dISC is displayed, indicating that the CD has not been
finalized. In that case, use FINALIZE on your CD recorder to complete the
recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing

2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 --:-- flashes in the display.

Volume and bass

Volume adjustment
• Adjust the volume by using VOLUME

+/-

on the cd player.

Bass adjustment
• Press DBB to switch the bass enhancement on or

off
y

appears if the bass enhancement is

activated.

DBB

DBB

Playback information

This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN ç slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press

2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing

2;.

yThe time at which playback was paused starts

flashing.

• You can continue playback by pressing

2; again.

5 Press

9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press

9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

0

Playing a CD

Selecting a track during playback
• Briefly press

∞ or § once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped
1
Briefly press

∞ or § once or several times to select

the desired track. The track number is displayed.

2 Press

2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback
1
Keep

∞ or § pressed to find a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the
particular track.

Selecting a track and searching

Advertising