Palsonic 3425G - Manual (Page 13)

2
1
Turning off
!
Press the Power Switch on the TV set.
If no picture appears, then the TV set is in STANDBY mode.
Now please follow step 2.
In STANDBY mode, press the button on the
remote controller and the TV set is turned on.
In STANDBY mode, you can also press the
AV/TV button on the set to turn on.
Notes:
If there is no input signal, then a blueback appears. After 15
minutes, the set auto goes to STANDBY.
Press the Power Switch on the TV set if you want
to cut off the power completely.
If you want to turn off the TV set temporarily,
press the button on the remote controller.
Turning on/off
Operations
Turning on/off
10
Turning on
3
2
1