Palsonic 3425G - Manual (Page 14)

Operations
Select Input Signal
Select input signal
!
4
3
2
1 Press AV/TV button on the TV set or AV button
on the remote control.
When the set is in TV mode, press this button and the set goes
to AV mode. Now you could watch video program from AV
input terminals.
If you want to switch to TV press AV button again or follow
step 2, 3 or 4.
Press digit buttons to switch back to TV mode.
Press CH+ or CH- button to switch back to TV
mode.
Press button to switch back to TV mode.
5
Press DSP button, the set displays current
input mode.
The OSD disappears in about 5
seconds.
Notes:
If the Timer item has been set,
the current time also appears.
11
Select input signal
18:09 19