Philips DVDR3375/93 - Manual (Page 37)

E
n
g
li
sh
37
Overwrite title (DVD±RW only)
This function allows you to record a new
title from the beginning of the current
title in the DVD±RW.
A In title editing menu, use  keys to
select { Overwrite Title } and press
OK.
B Select the source you want to record
from and press REC l to start
recording.
Overwrite from the selected title
You can choose to overwrite only the
recordings from a selected title to the
end of the disc.
A In video editing menu, use  keys to
select { Overwrite Disc } and press OK
to delete.
Append recording
This function allows you to append
recording to the last existing title.
A In title editing menu, use  keys to
select { Append Title } and press OK.
B Press REC SOURCE to select the input
channel to append.
C Press REC l to start append recording.
D To stop append recording, press
STOP n.
Editing/Finalizing Recording
(continued)
TIPS: No further recording and editing can be carried out on a finalized DVD±R.
Press  to go back to the previous menu.
Rename title
The original title name is automatically
generated by the DVD recorder. You can
give a new name to the title by following
the steps below.
A In title editing menu, use  keys to
select { Rename Title } and press OK.
 The keyboard screen appears.
B Use    keys to highlight a
character and press OK to select.
 The maximum input is up to 1
characters.
l
You can use the following keys on the
keyboard screen to edit your input:
BkSp : to remove the character to
the left of the cursor.
DELETE : to remove the character to
the right the cursor.
SPACE : to create a space between
characters.
CAPS : to toggle between upper and
lower case characters.
CLEAR : to clear the entry field
completely.
C To confirm your entry, select
OK
on
the keyboard and press OK.
 The info panel is now updated.
l
To cancel the changes, select
EXIT on
the keyboard and press OK.
Erase title
You can delete a specific title (recording)
from the disc.
A In title editing menu, use  keys to
select { Erase Title } and press OK.
 A warning message will appear.
B Select
YES
in the menu to proceed or
NO to abort, then press OK to
confirm.