Philips VidQuad Video Processors TC8276 Series - Manual (Page 2)

Connectors:
VIDEO INPUTS: Eight looping BNCs with HiZ/75
Ω
switches. Accepts 0.5 Vp-p to 2.0 Vp-p composite
video, sync negative, 2:1 interlaced.
VIDEO OUTPUTS: Two. 75
Ω
. BNC:
QUAD VIDEO OUT: Continuous quad presentation of
the four inputs, or a digitally zoomed quadrant.
Inputs are blanked to alert operator to absence
of video.
VIDEO OUT: The quad presentation, or any one of
four video inputs, full-screen, controlled via front
panel and/or over-riding full-screen alarmed
input(s).
ALARM/ACCESSORY Input/Output: 15-pin connector.
ALARM INPUTS: Four. Accepts momentary or
continuous closures to ground.
ALARM OUTPUT: Isolated relay, normally open
contacts, closes upon alarm input. The relay
contacts can handle up to 0.5 A at 20 VAC/VDC
(up to 36 volts peak from either pin of relay to
ground), and a maximum resistive load of 10 VA.
REMOTE CONTROL INPUT: Accepts contact
closures to provide remote control of quad
display and the freeze function.
VIDEO LOSS OUTPUT: Logic level low on video
loss.
Power Cord: 3-wire with grounded plug; 1.8 m (6 ft).
TC8276: NEMA 5-15P/C22.2, No. 42 plug.
TC8276X: CEE 7/7 plug.
Mechanical
Construction: Steel chassis with sheet metal cover and
plastic bezel.
Finish: Dark plum-colored case and front panel with
medium plum keys.
Dimensions: Height: 1 standard rack unit; width: 1/2
standard rack unit.
223 W x 362 D x 40 H mm (8.77 x 14.25 x 1.59 in).
Weight: 2 kg (4.5 lb).
Environmental
Temperature:
Operating: 0 °C to +40 °C (32 °F to +104 °F).
Storage: -40 °C to +60 °C (-40 °F to +140 °F).
Humidity: 10% to 90% relative, noncondensing.
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz.
Shock: 50 g, 11 ms, 1/2 sine.
Options
TC8101MK Rack Kit: For mounting one or two units in
an EIA 19-inch rack.
F r on t V ie w
S id e V iew
48 2. 6
19 .0 0 5 .8
0 .23
3 1.8
1 .25
4 3 .6
1 .7 2
35 5. 5
14 .0 0
S93 7 A4 1A E
m m
in
Rack Kit
Complies with the limits for a Class B digital device pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada.
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION FURNISHED BY PHILIPS COMMUNICATION & SECURITY SYSTEMS INC. (PCSS) IS BELIEVED TO BE ACCURATE
AND RELIABLE. HOWEVER, NO RESPONSIBILITY OR LIABILITY IS ASSUMED BY PCSS FOR ITS USE, NOR FOR ANY INFRINGEMENT OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES WHICH
MAY RESULT FROM ITS USE. NO LICENSE IS GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT OR OTHER RIGHTS OF PCSS.
© 1994, 1995 by Philips Communication & Security Systems Inc. All Right Reserved.
BURLE ® is a registered trademark of BURLE TECHNOLOGIES, INC. Marca(s) Registrada(s).
Philips Communication & Security Systems Inc., 1004 New Holland Avenue, Lancaster, PA 17601-5606, USA Tel: 1-717-295-6123 Fax: 1-717-295-6097
Philips Communication & Security Systems Inc., 986 Packer Way, Sparks, NV 89431, USA Tel: 1-702-331-4155 Fax: 1-702-331-2306
Philips Communication & Security Systems Inc., Access Control Hardware, 7041 Orchard, Dearborn, MI 48126-1781, USA Tel: 1-313-846-2623 Fax: 1-313-846-3569
Philips Electronics UK Ltd., Windmill Court, Brooklands Close, Sunbury-on-Thames, Middlesex TW16 7DX, England, U.K. Tel: 44-1932-765666 Fax: 44-1932-783198 Tlx: 851-917176
n.v. Philips Professional Systems s.a., Monnikenwerve 17-19, B-8000 Brugge, Belgium Tel: 32-50-454670 Fax: 32-50-454544
Philips Singapore Pte Ltd., 360 Orchard Road, #09-01A International Building, Singapore 0923, Republic of Singapore Tel: 65-734-7802 Fax: 65-734-1362 Telex: 786 37105
Printed in U.S.A./SEP95 Supersedes JUN95 Reprinted JUL96 TC8276