Philips SA5211 User Manual
Sa5211, Description, Features
SA5211
Transimpedance amplifier (180 MHz)
Rev. 03 — 07 October 1998
Product specification
c
c
1.
Description
The SA5211 is a 28 k
Ω
transimpedance, wide-band, low noise amplifier with
differential outputs, particularly suitable for signal recovery in fiber optic receivers.
The part is ideally suited for many other RF applications as a general purpose gain
block.
2.
Features
■
Extremely low noise: 1.8 pA /
√
Hz
■
Single 5 V supply
■
Large bandwidth: 180 MHz
■
Differential outputs
■
Low input/output impedances
■
High power supply rejection ratio
■
28 k
Ω
differential transresistance
3.
Applications
■
Fiber optic receivers, analog and digital
■
Current-to-voltage converters
■
Wide-band gain block
■
Medical and scientific Instrumentation
■
Sensor preamplifiers
■
Single-ended to differential conversion
■
Low noise RF amplifiers
■
RF signal processing
Document Outline
- 1. Description
- 2. Features
- 3. Applications
- 4. Pinning information
- 5. Ordering information
- 6. Limiting values
- 7. Static characteristics
- 8. Dynamic characteristics
- 9. Test circuits
- 10. Typical performance characteristics
- 11. Theory of operation
- 12. Bandwidth calculations
- 13. Noise
- 14. Dynamic range calculations
- 15. Application information
- 16. Package outline
- 17. Soldering
- 18. Revision history
- 19. Data sheet status
- 20. Definitions
- 21. Disclaimers