PYLE Audio SLV5400 - Manual (Page 10)

10
EN
Troubleshooting
Problem Tip
No image or wrong
image on TV1
•
Make sure video sources are
connected to the transmitter (A).
• Make sure the transmitter (A) is
connected to TV1.
•
Make sure SCART cables are
firmly inserted.
•
Make sure the video source is
switched on.
•
Make sure the correct SCART
input on TV1 is selected.
•
Select the correct video source
with TV1 source. See page 8.
No image or wrong
image on TV2
•
Make sure SCART cables are
firmly inserted.
•
Make sure the receiver (B) is
connected to TV2.
•
Make sure both receiver (B) and
transmitter (A) are switched on.
•
Make sure the video source is
switched on.
•
Make sure the correct SCART
input on TV2 is selected.
• Select the correct video source
with +/- on the receiver (B).
•
If the video source gives proper
image on TV1:
Make sure the video source gives
video signal in CVBS mode. See
its user manual
•
Change the wireless channel that
is used for communication. See
page 7.
•
The receiver (B) is out of range
of the transmitter (A). The num-
ber of walls and ceilings in
between the receiver (B) and
transmitter (A) restrict the dis-
tance.