Paradyne M/HDSL Standalone Termination Unit Hotwire 7984 - Manual (Page 122)

Index
IN-4 7984-A2-GB20-10 February 1999
SNMP
enable/disable management, A-16
limiting access, 7-4
NMS IP Address, A-19
NMS Security Options, A-18
support overview, 1-5
trap options, 6-2
trap support, 1-5
traps, B-1
typical configuration, 1-5
start-up, ATI, 2-1
status, test messages, 4-6
subnet, IP addresses, 8-1
switchpacks
definitions, 3-9
location, 3-8
S1 definitions, 3-9
system, LEDs, 4-13
System Options, A-6
T
Telco-initiated
line loopback, 5-9
loopback, enable, A-7
payload loopback, 5-10
remote line loopback, 5-10
remote loopback, enable, A-7
Telnet session
access, 7-1
access level, A-12
enable/disable, A-12
inactivity timeout, A-12
login required, A-12
options, A-11
terminal
communication parameters, 3-3
connecting, 3-3
terminal port, direct connection, 2-1
test
aborting, 5-9
DTE Loopback, 5-5
LED, 4-13, 5-8
Line Loopback, 5-3
menu, 5-2
procedures, 5-1
Remote Send Line Loopback, 5-6
Repeater Loopback, 5-4
Send and Monitor 511, 5-7
status messages, 4-6
switch setting for Telco loopback, 3-10
switch setting for Telco remote loopback, 3-10
Telco-initiated, 5-9
terminating, 5-9
Test Duration, A-6
Test Timeout, A-6
timeout
Com port session inactivity, A-10
Telnet session inactivity, A-12
test, A-6
traps, SNMP, 6-2, B-1
troubleshooting, 6-5
DSL performance statistics, 4-8
DSX-1 performance statistics, 4-10
error statistics, 4-7
U
UNIX, TFTP server on, 3-13
user interface, 3-3
async terminal, 2-1
how to access, 2-1
resetting/restoring access, 7-5
V
virtual function keys, 2-7
W
warmStart, B-1
weight of unit, D-1