Paradyne M/HDSL Standalone Termination Unit Hotwire 7984 - Manual (Page 57)

5-1 7984-A2-GB20-10 February 1999
Testing
5
Accessing the Test Menu
From the Test menu, you can run network tests, data port tests, and a front panel
lamp test.
To access the Test menu, follow this menu selection sequence:
Main Menu
→
Test
О
О
ОО
ОО
main/test Hotwire
Model: 7974
TEST
Network & DSX-1 Tests
Device Tests
Abort Tests
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Select . . . To . . .
Network and DSX-1 Tests Start and stop tests on the DSX or network interface.
Device Tests Start and stop lamp test.
Abort All Tests To abort all current tests excluding network-initiated
loopback tests. An aborted test may continue to run for
a few seconds as the abort command is sent to the
remote end and processed.