Philips MCD 908 - Manual (Page 4)

Playing a disc
1
2
3
Press OPEN •CLOSE
з ( з on the remote) to open the disc tray and load in a disc,
then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
Playback will start automatically. If not press ÉÅ .
To stop playback, press STOP
9 ( 9 on the remote).
Programming and tuning to radio stations
1
2
3
Press SOURCE ( TUNER on the remote) to select tuner source.
Press PROG on the remote for more than two seconds to program all available stations in
order of waveband.
Press PRESET+/-
( ¡ / ™ on the remote) until the desired preset station is displayed.
PDCC-JS/JW-0642
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
Notes for remote control:
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function ( 2;,
н, л
for example).
2005 C Koninklijke Philips Electronics N.V.
All rights reserved.
http://www.philips.com
MCD908 QUG_Eng-98 2006.10.23, 16:48 4