Panasonic 5300U - Manual (Page 22)

21
Battery
Connect the yellow battery lead to the correct
radio wire or to the battery fuse port on the fuse
block.
Antenna
Connect the antenna by plugging the antenna
lead into the antenna receptacle.
Equipment
Connect any optional equipment such as
amplifier, according to the instructions furnished
with the equipment. Keep about 12 inches (30
cm) of distance between the speaker
cords/amplifier unit and the antenna/antenna
extension cord. Read the operating and
installation instructions for any equipment you
will connect to this unit.
Accessory (ACC) Power
Connect the red power lead to the correct
vehicle radio wire or to the appropriate fuse port
on the fuse block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and
proceed to the final installation.
❏ Final Installation
Lead Connections
Connect all wires, making sure that each
connection is insulated and secure. Bundle all
loose wires and fasten them with tape so they
won't fall down later. Now insert the stereo unit
into the mounting collar.
Congratulations! After making a few final checks,
you're ready to enjoy your new auto stereo
system.
❏ Final Checks
1. Make sure that all wires are proper ly
connected and insulated.
2. Make sure that the stereo unit is securely
held in the mounting collar.
3. Turn on the ignition to check the unit for
proper operation.
If you have difficulties, consult your nearest
authorized professional installer for assistance.
Installation Guide
(continued)